Diacon Concrete Services

What We Do

Ground & Polished Concrete

The flagship of floor installations. 

Epoxy Coatings

There are times when epoxy is the only solution.

Concrete Seal

A very simple approach to protecting bare concrete.

Ground and Polished Concrete

The Flagship of Floor Installations.  Using concrete as a substrate, Ground and Polished Concrete can be installed for various applications: Industrial, Residential and Retail all included.  With a minimum of floor maintenance required, Ground & Polished concrete can also create highly decorative installations as well.  Think of this product as being similar to running a rock through a tumbler to get the Polished floor effect.  All performed with Specialty Diamond tooling, the Ground & Polish method grinds the concrete surface with metal bonded diamond tooling, densifying the concrete, and then polishes it to the desired sheen. When called for, we also guard the floor with a specialty barrier.

Epoxy Floor Prep

There are times when epoxy is the only solution.  Some solvents and acids can break down natural concrete and for this purpose, we introduce Epoxies.  There are various types of barrier installations all ranging from “thin mil” lightweight epoxies to heavy-duty Methyl Methacrylate (aka MMA).  Should you need an installation of this kind, we have a professional on-hand who runs the epoxies division with more than 25 years of experience so you can be sure of a quality installation.

Stencil and Logos

Stenciling and Logo creation available: 
Manteca Fire Station
W. Lathrop Rd.
General Contractor was Diede Construction
This station opened on 9/11 this year in remembrance.

Dye & Seal

Similar to Polished Concrete but with a sacrificial Sealer applied.  The shine of the floor will be dependent on the type of sealer requested, ie. Matte, High Gloss etc.  The Dye & Seal method is an inexpensive alternative to Ground and Polished Concrete.  In addition we can perform a light grind of the floor to open it up before applying the Dye and Sealer.

Large Scale Polishing Services

When it comes to large scale Grinding, Polishing or resurfacing, no need to look further. Diacon has machinery that can perform output far above our competitors.

Overlays

We do all types of concrete service installs.

Concrete Seal

A very simple approach to protecting bare concrete.  We simply clean the floor and apply the appropriate sealer to the surface.  Often used in industrial applications or applications where the industrial look is intended.  Diacon hosts a number of Sealers so please call us to discuss your needs so we may provide the proper sealer for your floor.

Acid Stain

An Acid Stain requires a floor prep to the surface by either applying acid or a single-grit grind preparation to the concrete surface.  The color is made from a chemical reaction to floor and Diacon will apply the acid stain color of your choice.  Once the Acid Stain has been applied, you may either choose an Acrylic Sealer (light duty) or a Urethane Sealer (heavy duty) depending on the floor traffic.

Joint Fill and Crack Repair

Joint Fill has two purposes: First, in industrial applications, it is used to ensure that both food & grease (for food industries) does not get caught in the joints.  It is also used for heavy traffic areas designed to prevent the concrete slabs from displacing when heavy machinery is rolled over (such as forklifts) causing heavy damage to the control joint which can be very expensive to repair.

The second purpose involves the ability to pick colors (any color available in the Pantone Color Chart) that will compliment your Dye and Seal, Acid Stain or Ground and Polished Concrete installation!

Epoxy Coatings

There are times when epoxy is the only solution.  Some solvents and acids can break down natural concrete and for this purpose, we introduce Epoxies.  There are various types of barrier installations all ranging from “thin mil” lightweight epoxies to heavy-duty Methyl Methacrylate (aka MMA).  you need an installation of this kind, we have a professional on-hand who runs the epoxies division with more that 25 years of experience so you can be sure of a quality installation.

Joint Fill and Crack Repair

Joint Fill has two purposes: First, in industrial applications, it is used to ensure that both food & grease (for food industries) does not get caught in the joints.  It is also used for heavy traffic areas designed to prevent the concrete slabs from displacing when heavy machinery is rolled over (such as forklifts) causing heavy damage to the control joint which can be very expensive to repair.

Tile Removal

Necessary for so many installations, whether for Ground and Polished Concrete, or any other custom installations we offer, or even for an installation that we don’t.  If your floor has tile, it needs to be removed before any application.  Diacon offers this service to our customers regardless of the installation or application you intend on using.

Contact Us

1169 South Main Street, Suite 136, Manteca, CA 95337

(415) 869-8787

(916) 249-7668

(209) 890-4300

bids@diacon.pro